Specialized: Crane, Rigging & Heavy Haul Career Roadmap
Rigger
A Rigger sets up the rigging that hoists and moves heavy loads safely, for construction, industrial, and marine work. It's an entry-level role on the Specialized: Crane, Rigging & Heavy Haul roadmap, and it's where the lane's lift planners and rigging supervisors learn the work by hand.
Rigger Job Description
Riggers make heavy, awkward loads movable. They pick the gear, attach the load, and guide it through doorways, over obstacles, and onto trucks for crane, rigging, and heavy haul operations. When a machine weighs more than the room it sits in was built to handle, the rigger's setup is what gets it out in one piece. Certain crane lifts must be rigged by a qualified rigger, one who meets OSHA's bar for a qualified person.
Core responsibilities:
- Select cables, slings, shackles, pulleys, and winches to match each load's weight and size, the site, and the work schedule
- Attach loads to the rigging with hand and power tools, and fix pulleys and blocks to overhead beams with bolts and clamps
- Move heavy equipment through narrow openings and confined spaces with chainfalls, gin poles, and gallows frames
- Tilt, dip, and turn suspended loads around obstacles using multi-point suspension
- Signal or verbally direct the crew while a load is hoisted and moved
- Test rigging for safety and reliability, and keep the inspection records current
- Align, level, and anchor machinery, load machines onto trucks for transport, and dismantle and store the rigging after each job
How to Become a Rigger
Rigger Education Requirements
Certification doesn't ask for a degree. NCCCO's rigger certification requires that you be at least 18 and comply with its Substance Abuse Policy and Code of Ethics. The rest of the learning happens on the crew.
Rigger Certification Requirements
NCCCO certifies riggers at two levels. Each requires a written exam and a practical exam, which you can take in either order. Level II covers more complex loads and calculations than Level I. OSHA doesn't require a signal person to be certified, but it does require each one to be qualified and documented. NCCCO's Signalperson card is third-party proof of that qualification.
- CCO Rigger Level I: National Commission for the Certification of Crane Operators (NCCCO). Entry: the core credential for a rigging crew. Valid five years, renewed by passing the written exam again.
- CCO Rigger Level II: NCCCO. The step up. Lift / Rigging Planning Specialists and Rigging Supervisors typically hold it.
- CCO Signalperson: NCCCO. A common credential to stack on a rigger card. It covers hand and voice signals, crane operations, and situational awareness. Valid five years.
Rigger Experience
Rigging is an entry seat, so most riggers bring a background rather than a prior title. Construction, industrial maintenance, and marine work all build the comfort with heavy loads and hand tools that the crew needs. Time as a Load Securement Technician or a Flatbed Driver also transfers, because you already know how a load behaves once it's on the move.
Rigger Skills
- Rigging gear selection: cables, slings, shackles, pulleys, blocks, and winches, matched to load weight and size
- Hoisting and pulling gear: chainfalls, gin poles, gallows frames, hoists, and rigging lines
- Multi-point suspension: tilting, dipping, and turning a suspended load around obstacles
- Rigging inspection and testing: checking gear for wear and recording the results
- Hand and voice signals: directing a crew or a crane operator through a lift
- Qualified person (OSHA) standard: showing, through a certificate, training, or experience, that you can solve problems in the work at hand
- Crane load charts: checking a load's weight against lifting capacity before the pick
- Machinery setting: aligning, leveling, and anchoring equipment in place
- Lift plan reading: working from a plan's rigging configuration, load weights, and capacities, often drawn in AutoCAD
A Day in the Life of a Rigger
6:30 AM
Sling and Shackle Inspection
Before any load moves, the gear gets tested. You lay out the slings and shackles at the plant's loading door and inspect each one for wear. A sling with a cut in its jacket goes into the out-of-service pile. You note it on the rigging inspection record.
7:15 AM
Lift Plan Briefing
The job today is pulling a stamping press out of a production bay and loading it onto a trailer. The lift plan came from the planning specialist, drawn in AutoCAD, with the press weight, the rigging configuration, and the capacity of every piece. Your lead walks the crew through it at the bay door.
8:30 AM
Chainfall Rigging Setup
You bolt and clamp a block to the overhead beam, then hang a chainfall from it. Pulleys and winches go in to match the press weight in the plan, and each piece's capacity gets checked against the number on the page. Then the crew tests the setup with a short lift before anyone commits the full load.
10:00 AM
Doorway Tilt and Turn
The doorway is the tight part. You rig the press at several points so it can tilt and turn past a support column. Then you talk the crew through every inch. Nobody touches a chain until your signal says so.
12:30 PM
Crane Pick to Flatbed
After lunch, an all-terrain crane is set up outside. The operator checks the press weight against the load chart while you rig it for the pick. A certified signal person takes the lift, and the press swings onto a flatbed trailer. The driver starts chaining it down.
2:00 PM
Press Set and Anchoring
Back inside, a replacement press arrives on rollers. You help align, level, and anchor it, checking the level at each corner before the bolts go in. The plant wants the new press running tomorrow, so the anchors get a second check before your lead signs off on the job.
3:45 PM
Rigging Teardown
The last job is putting the gear away. You dismantle the rigging, coil the lines, and store the blocks and shackles. Before you leave, you hand the out-of-service sling to your lead so a replacement is in the truck tomorrow.
Rigger Career Path
A Rigger Level I card gets you onto the crew. Level II is what moves you off it. The first 0 to 6 months cover certification and your first jobs, and specialist roles often follow within 1 to 3 years.
The natural next seat is Lift / Rigging Planning Specialist. Planners engineer the lift plan you've been working from, including the rigging configuration, load weights, and capacities, and they typically hold Level II. Calculations are the big difference, and Level II tests them.
If you'd rather lead the crew, Rigging Supervisor is typically 1 to 5 years out. A documented safety record and lead responsibility over a lift earn it, and supervisors usually hold Level II with a Signalperson card stacked on top. There's a sideways move, too. Signal and rigging work put you in the cab's line of sight every day, and many crew members add Crane Operator certification.
Rigger FAQs
What's the difference between Rigger Level I and Rigger Level II?
Level II covers more complex loads and calculations than Level I. Both are NCCCO certifications, and both require you to be at least 18 and to pass a written exam and a practical exam. Level I is the entry credential for a rigging crew. Lift planners and rigging supervisors typically hold Level II.
How long does rigger certification last, and how do I keep it?
Five years. To recertify, you pass the written exam again. NCCCO doesn't require a second practical exam for recertification. Keep your experience and your inspection records in order through the cycle, because the next step up usually asks what you've rigged as well as what you've passed.
How long does it take to go from rigger to lift planning?
Often 1 to 3 years. Lift planning is learned on the job, so the move goes to riggers who've worked from enough lift plans to know how one gets built. Earning Rigger Level II strengthens your case, since it tests the complex loads and calculations planners handle.
I've worked in construction. Does that transfer into rigging?
Yes. Riggers hoist and move heavy loads for construction, industrial, and marine work, so construction experience with heavy materials and hand and power tools carries over directly. You'll still need NCCCO rigger certification and on-the-job time with a crew. The comfort around heavy loads is the part that's hard to teach.
Related Roles
Roles moving up
See every rung on the Specialized: Crane, Rigging & Heavy Haul career roadmap.
Rigging Operations Leadership Search
The pick is decided before the crane moves.
A worn sling or an untested setup puts a suspended load over a crew. The leaders GESG places through crane and rigging executive search build rigging programs with certified crews, current inspection records, and a lift plan behind every pick.